How to Use a Beam Clamp Safely

Beam clamps are essential pieces of equipment that assist workers in load support, lifting, and rigging tasks on a variety of different job sites. Without them to fix heavy materials securely in place, it’s significantly more difficult and dangerous to handle loads of this capacity. As such, it’s crucial that each worker on a manual labor job knows how to use these tools in the most effective, safety-conscious way. Learn how to use a beam clamp safely to increase worker efficiency, productivity, and general well-being.

Don’t Use Defective Beam Clamps

Like climbing safety harnesses, power tools, or any other essential work equipment, you don’t want to find yourself using a defective beam clamp. This is one of the surest ways to experience a malfunction and get yourself, and your coworkers, seriously hurt. Beam clamps, in particular, must be in quality condition as they need to be strong enough to handle the certain weight while having the gripping power stay locked in place. So frequent inspections before each use are key to ensuring the tool is up to the task.

Check the Integrity of the Supporting Structure

Along with inspecting the beam clamp, you should also be inspecting the supporting structure to which the load will be clamped. The ideal location for the clamp should be undamaged, structurally sound, and assembled in the proper manner. Should you have any doubts of its stability, don’t try to use the clamp on it. Instead, make a report with your supervisor and find another place to act as support.

Ensure Lifting Equipment Is Compatible With the Clamp

Another part of using a beam clamp safely is to only use one in tandem with compatible rigging equipment. Because different manufacturers create their products in various ways, it’s often encouraged to use tools of the same brand together. This is the best way to ensure that everything functions together the way they should and that you’re minimizing the chances of a malfunction occurring.

Position Clamp Over the Load’s Center of Gravity

When beginning to position and place your beam clamp, you also need to be sure that you’re placing it in a spot directly over the load’s center of gravity. These tools rely primarily on strength and balance to keep loads level while being lifted and reduce the chances of them slipping out of their slings. So in order for the clamp to be effective, it will need to be holding the materials at the point of equal weight distribution. This will keep the load secure while in motion and maintain the welfare of those assisting in the process.