DILLON Quick-Check Tension Meter Complete Set

The Dillon Quick-Check tension meter is the premier innovation in the cable tensioning industry. Nothing comes close to the absolute simplicity of design and accuracy. It is ideal for cable guardrails, guy lines and overhead wires. The digital load cell is rugged, highly repeatable and accurate.

The Dillon Quick-Check tension meter can be placed on a cable, measure its tension, and removed in under five seconds. There are no complex lookup tables or conversion charts – saving time and money. The Quick-Check tension meter can be employed in many industries requiring proper and provable tensioning.

Typical applications include:

• Cell towers
• Stack guy wires
• Pre-tensioned cable barriers
• Bridges
• Elevators
• Winch rope
• Overhead electric transit wires
• Fall arrest systems
• Aircraft arresting cables
• Utilities

The operator can quickly select from 20 pre-calibrated wire sizes and types stored in Quick-Check's memory. The Quick-Check tensioning mode graphically displays the current and target tension control limits for extremely quick setting of line tension. Even the infrequent battery changes are quick.

Complete Set Includes:
DIL362890014 Quick Check Tension Meter
DIL363090044 Sheave Set 3/16" – ½"
DIL362930109 Sheave Set ½"-1"
DIL363289517 Case
DILCALIBRATE Calibrated for the following sizes: 1x7 – 3/16", ¼", 5/16", 3/8", 7/16", ½", 9/16", 5/8", 1x19 – 9/16", 5/8", 11/16", ¾", 13/16", 7/8", 1"

- Capacities: 2000 lb/10 kN/1000 kg 10,000 lb/45 kN/4500 kg
- Wire Calibrations: Up to 20 wire calibrations
- Modes: Live tension, Dual peak, Average, Check tensioning & Store
- Capture Rate: 10Hz, 100Hz & 1000Hz
- Accuracy: + 3% instrument capacity
- Test: BIT test enabled
- Operating Range: -4° F to 158° F (-20° C to 70° C)
- Protection: Hard polymer storage case included
- Environmental: Suitable for continued outdoor use
- Weight: 11 lb (5 kg)
- Range: Wire sizes from 3/16" (4.75 mm) up to 1.0" (25.4 mm)
- Memory: Up to 255 logs
- Units of Measure: lbf, kgf & Newtons
- Resolution: Low / med / high (5000 resolutions)
- Data Export: RS232
- Battery: 2 x AA battery's with 120+ hours life (backlight off )
- Size: 10 x 23 x 3" (25 x 59 x 8 cm)
- Recalibration: Every 12 months
- Calibration: Each wire rope is calibrated and is traceable to the National Institute of Standards and Technology. Certificate included with curve readings. Passes only with three consecutive confirming runs, with all points in specification.