MY-TE 115V AC Powered Capstan with Foot Control

Utility Capstan Electric Winch-Hoist wth Foot Control

• 800 lb. single-line lifting capacity
• 1600 lb. double line lifting capacity
• Trifecta system 115V brake motor with triple brake system for instant stopping
• Worm gear reduction for positive load holding
• Portable and rugged
• Low voltage 10′ pendant control - choice of hand or foot
• Capstan rope drum
• Frictionless bearings
• 286:1

My-te's flagship capstan winch-hoist is a tough, highly portable unit that is perfect for the likes of utility truck installation, overhead line crews, tower and antenna erection, and transformer replacement. It maintains an 800-lb single-line or 1,600-lb double-line lift capacity with a capstan rope drum and a 10-ft foot control.

Hoisting Rope:Consult your local dealer for type and size of rope. Maintain at least three wraps of rope on capstan drum when in use. Heavier loads may require four wraps of rope.

Power:
• Universal 18,500 RPM reversible 1.25 HP brake motor (no-load speed)
• 15' power cord plugs into any 115 Volt AC grounded outlet
• 6 amp – No load
• 20 amp – Full load

Speeds:
• 59 FPM: No-load drum speed
• 30 FPM: 500 lbs

Duty Cycle:
• 25% – 15 min/hr when operating at full load.

All My-te winches and hoists are designed for material handling usage only:
-Overhead line crews
-Tower and antenna erection
-Transformer replacement

This rugged, portable winch-hoist is great for utility truck installation, tower and antenna erection, transformer replacement and overhead line crews.

Optional accessories available on our website:

• Swivel Mount: Designed for installation with My-te's Capstan Series Winch-Hoists. Swivel mount bolts to your truck bed. Capstan winch frame bolts to swivel mount using tapped mounting holes. Winch rotation allows you to use your winch even when your truck is in an awkward location. Pin stop locks swivel base in one position.
• Pole-Mount Adapter: Sturdy steel construction with mounting bolts for bolting adapter to winch frame. Comes complete with chain tightener for securing to pole. Allows same base-mounted unit to be used in either installation
• Receiver Hitch Mount: Part No. Bolts to My-te capstan winch-hoists in order to mount the unit to your vehicle's 2″ receiver hitch. The mounting plate is shipped with hardware, but the receiver hitch pin is not included. Mounting plate may be used with any current frame style My-te capstan.