Petzl Assembled Kit - ASAP + ASAP'SORBER 20cm + BM'D + CAPTIV
The ASAP FALL ARREST SYSTEM with ASAP'SORBER 20cm: This assembled system from Petzl includes everything to you need to use the ASAPLock and keep within ANSI standards: ASAP, ASAP'SORBER 20cm, Bm'D Aluminum Carabiner and CAPTIV. Compatible Petzl RAY 11 mm static rope with sewn termination is sold separately
THIS COMPLETE SYSTEM INCLUDES:
1. ASAP® Mobile fall arrester. For complete info click here.
With its unique locking system, the ASAP sets the standard in fall protection for workers at height. In normal use, the device moves freely along the rope without any manual intervention and follows the user in all his/her movements. In the event of a shock load or sudden acceleration, the ASAP locks on the rope and stops the user. Depending on the intended use, the ASAP may also be combined with an ASAP'SORBER or ASAP'SORBER AXESS energy absorber to work at a distance from the rope. It arrests falls, slides, and uncontrolled descents; works on vertical or angled rope; locks on the rope even if grabbed during the fall.
2. ASAP'SORBER Energy absorber 20 cm. For complete info click here.
The ASAP'SORBER energy absorber may only be used with an ASAP or ASAP LOCK mobile fall arrester. It allows user to work at a distance from the rope, in order to protect it during certain work phases. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. It is designed for users who weigh between 110 and 285lbs (50 and 130 kg).
3. Bm'D Lightweight High-strength Aluminum Carabiner. For complete info click here.
The Bm'D lightweight asymmetrical carabiner is made of aluminum. It has a D shape particularly suited for connection to diverse equipment such as descenders or positioning lanyards. Its fluid interior design and Keylock system facilitate handling. The Bm'D carabiner has the TRIACT-LOCK automatic locking system. The sleeve is reinforced for greater front and lateral gate strength. Bm'D is used with a CAPTIV positioning bar to favor loading of the carabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device.
4. CAPTIV bar Single. For complete info click here.
Must be used with the included OXAN carabiners in order to maintain ANSI status, the CAPTIV bar keeps the carabiners integrated with the lanyard as well as favors loading of carbiners along the major axis.